增加判断防止输出过流

DcPillar/Src/SmartAllocation/Drv_SmartAllocation.c

@@ -372,6 +372,10 @@ void DcModuleCtrlProcess_SmartAllocation(void)
 
 			DcModuleManage.Cmd	= 0x55; 		//开机
 
+			//增加判断,防止输出过流
+			if(DcModuleGroup[i].flag == 1)	
+				SendDataToDcModule(i, DcModuleManage.Cmd, DcModuleManage.SetVolt, DcModuleAbility.MinCurrt * 100);
+			else
 				SendDataToDcModule(i, DcModuleManage.Cmd, DcModuleManage.SetVolt, DcModuleManage.SetCurrt);
 		}
 	}
@@ -433,9 +437,10 @@ void DcModuleCtrlProcess_SmartAllocation(void)
 				continue;
 
 			DcModuleManage_B.Cmd = 0x55;		//开机
-			
-			SendDataToDcModule(i, DcModuleManage_B.Cmd, DcModuleManage_B.SetVolt, 
-				DcModuleManage_B.SetCurrt);
+			if(DcModuleGroup[i].flag == 1)
+				SendDataToDcModule(i, DcModuleManage_B.Cmd, DcModuleManage_B.SetVolt, DcModuleAbility.MinCurrt * 100);
+			else
+				SendDataToDcModule(i, DcModuleManage_B.Cmd, DcModuleManage_B.SetVolt, DcModuleManage_B.SetCurrt);
 		}
 
 	}
@@ -640,9 +645,6 @@ void SendDataToDcModule_ZhongXing(u8 group_index, u8 cmd, u32 volt, u32 current)
 	DataSend.Len		= 8;
 	DataSend.Data[0]	= (flag<<4) | sendCmd;
 	DataSend.Data[1]	= group_index + 1;
-	if(((sendCmd==0x01||sendCmd==0x03)&&DcModuleGroup[group_index].modules[0].status.Value.OnOff!=0x02)
-		||(sendCmd==0x02&&DcModuleGroup[group_index].modules[0].status.Value.OnOff!=0x01))
-	{
 	Temp				= current/10;
 	DataSend.Data[4]	= (u8) (Temp >> 8);
 	DataSend.Data[5]	= (u8) (Temp >> 0);
@@ -652,6 +654,9 @@ void SendDataToDcModule_ZhongXing(u8 group_index, u8 cmd, u32 volt, u32 current)
 	DataSend.Data[6]	= (u8) (Temp >> 8);
 	DataSend.Data[7]	= (u8) (Temp >> 0);
 	
+	if(((sendCmd==0x01||sendCmd==0x03)&&DcModuleGroup[group_index].modules[0].status.Value.OnOff!=0x02)
+		||(sendCmd==0x02&&DcModuleGroup[group_index].modules[0].status.Value.OnOff!=0x01))
+	{
 		//放入队列
 		if (pdTRUE != xQueueSend(DcModeMsg, &DataSend, 0))
 		{
@@ -662,14 +667,6 @@ void SendDataToDcModule_ZhongXing(u8 group_index, u8 cmd, u32 volt, u32 current)
 	if(DcModuleGroup[group_index].modules[0].status.Value.OnOff == 0x02) //非停止充电,下发修改充电参数
 	{
 		DataSend.Data[0]	= (flag<<4) | 0x05;
-		Temp				= current/10;
-		DataSend.Data[4]	= (u8) (Temp >> 8);
-		DataSend.Data[5]	= (u8) (Temp >> 0);
-		Temp				= volt/100;
-		DataSend.Data[2]	= (u8) (Temp >> 8);
-		DataSend.Data[3]	= (u8) (Temp >> 0);
-		DataSend.Data[6]	= (u8) (Temp >> 8);
-		DataSend.Data[7]	= (u8) (Temp >> 0);
 		if (pdTRUE != xQueueSend(DcModeMsg, &DataSend, 0))
 		{
 			//osDelay(10);